IMPCO LPG PROPANE CARBURETOR MIXER CA125 CA125-20

Description

(PICTURES SHOWN OF THIS PRODUCT ARE ONLY FOR THE PURPOSE OF SHOWING THE BASIC DESIGN OF THIS UNIT)
FREE SHIPPING
ON THIS PRODUCT ANYWHERE
IN THE 48 STATES.
SHIPPING DISCOUNTS
AVAILABLE TO ALL OTHER LOCATIONS
WORLDWIDE
INCLUDING HAWAII AND ALASKA...PLEASE CONTACT US FOR DETAILS.
TECHINCAL DESCRIPTION
THE MODEL 125 CARBURETOR IS A SINGLE-DIAPHRAGM AIR VALVE CARBURETOR/MIXER.  IT OFFERS A DOWN DRAFT AIR INLET THAT CAN BE USED FOR REMOTE AIR FILTRATION OR OPEN-ELEMENT TYPE AIR FILTERS.  THIS UNIT IS ALSO AVAILABLE FOR LPG AND NATURAL GAS APPLICATIONS.  IT HAS BEEN SUCCESSFULLY  USED FOR OTHER HYDROCARBON-BASED VAPOR FUELS AS LOW AS 500 BTU.
THE MODEL 125 IS ALSO AVAILABLE FOR FEEDBACK APPLICATIONS WITH THE 'FB' DESIGNATION.  THESE FB MIXERS ARE AVAILABLE IN TAMPER RESISTANT CONFIGURATION, INDICATED BY THE SUFFIX :-TR" ON THE PART NUMBER.
TWO SEPARATE AIR VALVE VACUUM SUPPLIES ARE AVAILABLE WITH THIS MIXER.   ADDITIONAL LOW SPEED MIXTURE CONTROL CAN BE OBTAINED TO LEAN AIR-FUEL MIXTURES WITH OPTIONAL SHIMS.  CHECK THE ACCESSORIES SECTION FOR MORE INFORMATION.  ALL 125DG SERIES MIXERS REDUCE AIRFLOW BY 30%
TECHNICAL SPECIFICATIONS
FUEL.................................................NATURAL GAS AND LP-GAS
AIR FLOW CAPACITY.....................235 cfm @ 2.0 in  MANIGLOLD  DEPRESSION
HORSEPOWER RATING....................146 hp @ 2.0 in Hg MANIFOLD DEPRESSION
PORT SIZE..........................................1/2 NPT
MATERIALS:
BODY...................................................ALUMINUM
DIAPHRAGM.......................................HYDRIN OR SILICONE
DIAPHRAGM COVER......................... ALUMINUM
PLEASE SEE FOLLOWING DESIGN DETAILS FOR SPECIFIC PRODUCT SPECS:
ITEM IS A  MODEL 125 CARBURETOR WITH MIXER (CA125M)
THROTTLE BODY:  AT2-16-1
SAE FLANGE:  1.25"X1.50"
[A]   CENTER TO  CENTER BOLT SPACING: 71.4mm (2.813")
[B]    BORE:   42.9mm (1.688")
[C]    MIXER AIR HORN DIA.:   130mm (5.125")
[D]    OVERALL WIDTH:  140mm (5.500")
[E]     NPT INLET:  1/2"
[F]     OVERALL HEIGHT:  141mm (5.563")
[G]     THROTTLE BODY HEIGHT:  41.3mm (1.625")
[H]     THROTTLE SHAFT DIA.:  7.9mm (0.313")
[I]      FLANGE TO CENTER OF AIR HORN:  79.4mm (3.125")
Most of the items in our ebay store are normal stock items and will ship the same day they are paid for...however...because we sell a lot of products outside of the ebay community...please understand that on a rare occasion an item may not be available for immediate shipment.  If time is critical...please contact us to be sure the item is in stock before bidding.
Be sure to add me to your
favorites list
!
Check out my
other items
!
Sign up for
PayPal
; the fast, easy, and secure way to pay online.
Powered by
eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.
Feel free to ask us about
conversion kits
for almost anything including
trucks, cars, generators, tractors, boats, motorcycles, RVs etc
. We can build a kit to convert almost any engine!
WARNING:
This product can expose you to chemicals including Lead and lead compounds, which are known
to the State of California to cause cancer. For more information go to
www.P65Warnings.ca.gov
.
WARNING:
This product can expose you to chemicals including l
ead and lead compounds,
which are known
to the state of California
to
cause
cancer.
www.P65Warnings.ca.gov
.
WARNING:
These products contain a chemical known to the state of California to cause cancer
and birth
defects or reproductive harm.
www.P65Warnings.ca.gov
.