IMPCO LPG PROPANE CARBURETOR MIXER CA100 CA100-108 FORKLIFT FORK LIFT

Description

(PICTURES SHOWN OF THIS PRODUCT ARE ONLY FOR THE PURPOSE OF SHOWING THE BASIC DESIGN OF THIS UNIT)
FREE SHIPPING
ON THIS PRODUCT ANYWHERE
IN THE 48 STATES.
SHIPPING DISCOUNTS
AVAILABLE TO ALL OTHER LOCATIONS
WORLDWIDE
INCLUDING HAWAII AND ALASKA...PLEASE CONTACT US FOR DETAILS.
TECHINCAL DESCRIPTION
THE MODEL 100 SERIES IS A SINGLE DIAPHRAGM AIR-GAS VALVE CARBURETOR/MIXER.  IT OFFERS A 90-DEGREE AIR INLET TO PROVIDE LOW OVERHEAD CLEARANCE, AND IS AVAILABLE WITH SEVERAL AIR HORN AND THROTTLE BODY OPTIONS.  THIS UNIT IS AVAILABLE FOR LPG AND VARIOUS NATURAL GAS APPLICATIONS.  IT HAS BEEN SUCESSFULLY USED FOR OTHER HYDROCARBON-BASED VAPOR FUEL AS LOW AS 500 BTU.  THE MODEL 100 IS ALSO AVAILABLE FOR FEEDBACK APPLICATIONS WITH THE 'FB' DESIGNATION.
THE 100 MIXER PROVIDES A CONVENIENT 1/8 NPT BALANCE PORT AND TWO SEPARATE AIR VALVE VACUUM PORTS.  ADDITIONAL LOW SPEED, IDLE MIXTURE CONTROL CAN BE OBTAINED TO LEAN AIR-FUEL MIXTURES THROUGH THE USE OF OPTIONAL SHIMS.
TECHNICAL SPECIFICATIONS
FUEL.................................................TYPE NATURAL GAS,     DIGESTER GAS
AIR FLOW CAPACITY....................93 L/s (197cfm)@2.0 in Hg MANIFOLD DEPRESSION
HORSEPOWER RATING...................91.7 kW(123 hp)@2.0 in Hg MANIFOLD DEPRESSION
PORT SIZE..........................................1/2 NPT
MATERIALS:
BODY...................................................ALUMINUM
DIAPHRAGM.......................................HYDRIN OF SILICONE
DIAPHRAGM........................................COVER ALUMINUM
PLEASE SEE FOLLOWING DESIGN DETAILS FOR SPECIFIC PRODUCT SPECS:
ITEM IS A SINGLE DIAPHRAGM AIR-GAS VALVE CARBURETOR WITH MIXER (CA100M-3-3)
THROTTLE BODY:  AT2-23-6
SAE FLANGE:  1.25"
[A]   CENTER TO  CENTER BOLT SPACING: 68.3mm (2.688"
[B]    BORE:   36.5mm (1.438")
[C]    MIXER AIR HORN DIA.: 52.4mm (2.063")
[D]    OVERALL WIDTH:  131mm (5.156")
[E]     NPT INLET:  1/2"
[F]     OVERALL HEIGHT:  116.3mm (4.58")
[G]     THROTTLE BODY HEIGHT:  34.9mm (1.375")
[H]     THROTTLE SHAFT DIA.:  8.0mm (0.313")
[I]      FLANGE TO CENTER OF AIR HORN:  67.06mm (2.64")
Most of the items in our ebay store are normal stock items and will ship the same day they are paid for...however...because we sell a lot of products outside of the ebay community...please understand that on a rare occasion an item may not be available for immediate shipment.  If time is critical...please contact us to be sure the item is in stock before bidding.
Be sure to add me to your
favorites list
!
Check out my
other items
!
Sign up for
PayPal
; the fast, easy, and secure way to pay online.
Powered by
eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.
We have
thousands
of parts in stock, if you do not
see
the part you need!
Feel free to ask us about
conversion kits
for almost anything including
trucks, cars, generators, tractors, boats, motorcycles, RVs etc
. We can build a kit to convert almost any engine!
WARNING:
This product can expose you to chemicals including Lead and lead compounds, which are known
to the State of California to cause cancer. For more information go to
www.P65Warnings.ca.gov
.
WARNING:
This product can expose you to chemicals including l
ead and lead compounds,
which are known
to the state of California
to
cause
cancer.
www.P65Warnings.ca.gov
.
WARNING:
These products contain a chemical known to the state of California to cause cancer
and birth
defects or reproductive harm.
www.P65Warnings.ca.gov
.