Holley FR-76851HB 850 CFM Ultra Double Pumper Carburetor - Factory Refurbished

Description

S&D HOL Carb
Factory Refurbished
Picture above is for representation only
Actual product may vary
See description below
Product  Specifications
Part Number
FR-76851HB
Warning
California Proposition 65
Choke
Manual
Primary Main Jet
80
Fuel Inlet
Dual
CFM
850
Vacuum Ports
1 timed (spark) port, 2 full, and 1 PCV port
Supercharged Application
No
Primary Pump Nozzle Size
31
Finish
Hard Core Gray
Condition
Factory Refurbished
Emission Code
3
Warranty
Limited 90 Day
Billet Color
Black
Marine Use
No
Secondaries
Mechanical
Booster
Down Leg
Carburetor Use
Performance and Race
Material
Aluminum
Barrels
4
Primary Power Valve
6.5
Throttle Bore
1.750 inch
Fuel
Gasoline
Model
4150
Secondary Pump Nozzle Size
31
Secondary Main Jet
80
Product Summary
Mechanical Secondaries - 4150
Product Description
This is an official Holley Performance Factory Refurbished Carburetor. Factory Refurbished carbs are NOT old worn-out carbs that have been rebuilt. They are carbs that were returned under warranty. When these carbs are returned, we check them out and most of the time there is nothing wrong with them. Generally, they were simply adjusted out of working range by the installer. Since these carbs may show signs of a previous installation, our policy is not to sell them as new. Rather than scrapping them, we are making them directly available to the public. Not only does this help us control the costs of our new carbs, but it also allows you to get a great deal on a like-new carburetor! Factory Refurbished carbs have undergone a thorough inspection. Any damaged parts that would affect performance have been replaced and the carbs are solvent cleaned before being wet-flow-tested on Holley's state-of-the-art flow benches allowing them to be recalibrated to new carb specs. Factory Refurbished carbs may have scratches, blemishes, and other visual flaws from the previous installation. Factory Refurbished Carburetors have limited availability. ULTRA light Aluminum construction for 43% weight savings ULTRA stealthy Hard Core Gray™ anodized finish ULTRA strong Billet metering blocks & base plates ULTRA cool Black anodized billet aluminum metering blocks and base plate ULTRA easy Built-in sight window for simple float adjustments ULTRA fast High-performance fuel curves The Ultra Double Pumper™ Carburetors feature all aluminum construction and are equipped with metering blocks and a base plate made from 6061-T6 billet aluminum. They weigh in at approximately 5 lbs. less than a comparable zinc carburetor. The new Ultra Double Pumper Carburetors have an enhanced fuel curve for optimum performance, with many more features such as aluminum construction; anodized billet aluminum metering blocks, and base plate; 4 corner idle for precise idle control; mechanical secondaries for great performance; clear fuel level sight plugs for easy, no mess fuel level adjustments; Ford automatic transmission kick down for use on popular Ford transmissions; four vacuum ports for all necessary vacuum accessories; and a manual choke for easy, fast cold start-ups. The clean, stealthy look coupled with Black metering blocks and throttle body will certainly set your ride apart whether you are at the show or track. This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB, and Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932.
Hard Core Gray™ w/ black anodized billet aluminum metering blocks/base plate. Casting is hard coat anodized for ultimate corrosion resistance
Ultra Double Pumpers feature an Optimized street/strip calibration that works out-of-the-box
Manual choke (Cable driven, hand operated) for precise cold start control
Mechanical secondaries for awesome tire turning performance
4 corner idle allows you to precisely control your idle system
Built in, clear fuel level sight glass for easy, no mess fuel level adjustments
Aluminum construction for a 43% weight savings
Compatible with GM, Chrysler, and Ford A/T kickdown linkage. Additional parts may be required.
Intended for lightweight vehicles w/ manual trans or automatics with high stall & low gearing
100% wet-flow tested by Holley technicians to assure it arrives ready to run!
Holley Factory Refurbished Carb Description
This is an official Holley Performance Factory Refurbished Carburetor listing.
Factory Refurbished carbs are
NOT
old worn-out carbs that have been rebuilt.
They are carbs that were returned under warranty.
When these carbs are returned, we check them out and most of the time there is nothing wrong with them.
Generally, they were simply adjusted out of working range by the installer.
Since these carbs may show signs of a previous installation, our policy is not to sell them as new.
Rather than scrapping them, we are making them directly available to the public.
Not only does this help us control the costs of our new carbs, it allows you to get a great deal on a carburetor!
Factory Refurbished carbs have undergone a thorough inspection.
Any damaged parts that would effect performance have been replaced and the carbs are solvent cleaned before being wet-flow-tested on Holley’s state-of-the-art flow benches allowing them to be recalibrated to new carb specs.
Factory Refurbished carbs may have scratches, blemishes, and other visual flaws from previous installation.
Factory Refurbished Carburetors have limited availability.
General Policies
Payment Method
We gladly accept PayPal and All Major Credit Cards. Don't have a PayPal account?
Sign up here!
We are required to charge sales tax in Kentucky, California, Indiana and Texas. Tax will be figured at checkout.
Warranty & Return Policy
Holley Factory Refurbished Carburetors are warranted for a period of 90 days from date of sale for defects in material and workmanship. Any defective items will be repaired or replaced at Holley’s discretion.
In the unlikely event you have a problem with your Factory Refurbished carb, please call Holley’s tech service department at (866) 464-6553, use option 6. Should a Holley tech service associate determine that it is necessary to return the item for repair or replacement, you will be given instructions and a Returned Goods Authorization number (RGA).
Buyer is responsible for return shipping; however, Holley will cover shipping the repaired or replaced item back to the buyer.
Expedited freight may be available upon request and at buyer’s expense.
This Factory Refurbished Warranty supersedes any new product warranty that may be included in your kit.
Shipping & Tracking
Please see the “Shipping and Payment” tab
We ship all US orders via United Parcel Service (UPS Ground)
A signature is required on all UPS orders over 0
Tracking information will be sent via email after your package ships (you must supply a valid email address during checkout)
We ship within 1 business day upon receipt of payment
We do not ship to APO/FPO or US Post Office Box addresses
We ship internationally thru United States Postal Service (USPS) Express Mail International; allow extra time for international shipments
We can not ship as a "GIFT" or ship anything internationally with changes to the invoice
Customer Service & Feedback
Our eBay customer service hours are 7:00 am – 4:00 pm Central Time Monday thru Friday (excluding holidays)
If you are not certain about an item or have questions, use the “Ask Seller a Question” link under the listing.
We strive to answer questions submitted thru eBay’s message system within 1 business day
If you have a technical question about your purchase, please call our Tech Services department at (866) 464-6553 between 8:00 am – 6:00 pm M-F and Saturdays 9:00 am to 3:00 pm.
We want you to be completely satisfied with your purchase – please let us know if you have any problems with your purchase
before leaving feedback
so we have a chance to make it right – we want your repeat business!
Check out the official Holley Performance
eBay Store
for more great deals!!