Edelbrock 1406 Performer 600CFM Carb w/8131 and 8123 Fuel Line

Description

Bolt-on-and-run performance right out of the box, Lightweight all-aluminum body is compatible with gasohol and blended fuels, Change jets, adjust floats & replace needles/seats without draining fuel or removing carb, Chrome Steel Fuel Inlet for Edelbrock carburetors provide a clean and custom plumbing solution, These high-quality fuel line kits offer a clean and precise fuel supply line for mechanical fuel pumps with a 3/8" NPT outlet, when using an Edelbrock Single- or Dual-Feed fuel inlet kit
Edelbrock 1406 Performer 600CFM Carb w/8131 and 8123 Fuel Line
Sku # 9109599
Mfr. Part # 9109599
Condition
New
Brand
Edelbrock
Sold
Kit
Details
Info
Kit Includes:
(1) Edelbrock 8131 Performer Carb Fuel Line Kit & Fuel Filter, -6 AN Inlet
(1) Edelbrock 1406 Performer 600 CFM 4 Barrel Carburetor, Electric Choke
(1) Edelbrock 8123 Performer Fuel Line & Fitting Kit, Fuel Pump to Filter
(1) Carburetor Stud Kit, 1-3/8 Inch
Edelbrock 8131 Performer Carb Fuel Line Kit & Fuel Filter, -6 AN Inlet
The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing
The Edelbrock #8131 includes a polished aluminum fuel filter with a 40-micron filter element and -6 AN male inlet will accept an Edelbrock fuel line kit for a complete fuel pump to carburetor plumbing solution
The Edelbrock #8131 is manufactured of plated steel and include a 5/8" -20 threaded banjo bolt with gaskets
Edelbrock 1406 Performer 600 CFM 4 Barrel Carburetor, Electric Choke
Electric choke
Bolt-on-and-run performance right out of the box
Smooth throttle response throughout the power band
Lightweight all-aluminum body is compatible with gasohol and blended fuels
Includes both timed and full vacuum ports for ignition advance
Uses metering rods to transition between circuits - rods can be changed in seconds without carburetor removal or draining fuel
Float levels are factory set; adjustments are rarely needed
Change jets, adjust floats & replace needles/seats without draining fuel or removing carb
Two-piece design means no gaskets below the fuel level for leak-free operation
Edelbrock 8123 Performer Fuel Line & Fitting Kit, Fuel Pump to Filter
For Performer Series Carburetors
Pre-fitted Stainless Lines
Connects From Filter to Pump
(For S/B Chevy, S/B Chrysler, and B/B Chrysler)
Carburetor Stud Kit, 1-3/8 Inch
Easy installation/removal of carb plates
Includes zinc plated steel studs, nuts and washers
Specs
Material Type
Aluminum
Sold in Quantity
Kit
Finish
Natural
Color
Silver
CFM
600 CFM
Fuel Type
Gasoline
Carburetor Barrels
4-Barrel
Choke Type
Electric
Carburetor Flange Type
4-Barrel Square Bore
Secondary Type
Air Valve
New or Remanufactured
New
Gasket(s) Included
Yes
CFM Range
600-699 CFM
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.