500 Big G Rochester 2G imca hobby stock

Description

Visit our website
with the new payouts for me from eBay when you pay for your carb i will have to wait to process your order till eBay pays me sorry but it is eBays doing
This auction is for the 500cfm Rochester 2 jet carburetor (The G500E) that has been modified for
racing. It
was built with IMCA Hobby Stocks in mind,360ci 9to1. I can custom build one to any size up to 700cfm.I have developed these carbs using a Flowbench and the the continues input of my testers and a customer network of
Racers. This
carb will pass IMCA Tech
The venturis have Machined  to 1 3/8". Main jets re-taped for Holley jets for ease of re-jetting if needed and come with
Holley
jets
installed. The
Venturi Cluster is Modified for fuel emulsion for
Racing, the
accelerator pump circuit is is enlarged for response off the corners and the high flow main body gives the flow at the end of the straight to
enlarge
high flow needle and seat installed for enough fuel flow. A
ll vacuum ports were plugged. All Carbs are tested on a Hobby Stock Engine before i ship'em. All fuel goes through the main jets for better control. Stainless steel screws installed in the throttle plates. These Carbs run like a stripped-assed-ape,
mileage
not so good :-).Not for street use. As of this revision Big G carb owners have almost 400 Feature Wins, and 31 point champs, 8 IMCA State championship, Racers running Big G carbs Make the Big Dance at Boone every year. My carbs
aren't
the
prettiest
but they do run the best.
Thanks for looking
Core charge included!! But if you have some cores you
don't
need drop me a line.
Look at my e-bay store for other Rochester 2bbl's and parts
http://stores.ebay.com/SPH?_rdc=1
A couple of emails from racers who bought Big G Carbs.
Dear Guzzer,
hi this is matt got a carb from ya a couple weeks ago. great job went from mid pack to the front instantly. thank you.
Dear
Guzzer
wow it worked great it woke our motor up. First night out we won your heat by a whole straight away then we got rained out can't wait for next weekend thanks for the great carb I wish we bought one last year. Thanks again Ed
Dear
Guzzer
Put that carb on 412 cu in, 2 weeks
ago, been
messing with springs on rear, run 2 nd last wk till tire blowed, were fastest thing there, fixing to WIN Sat nite, thanks Red
Dear
Guzzer
I let my buddy try out the carb i just bought from you man it woke his motor up so i dont think im getting it back so i need another thank you
Dear Guzzer
This is the best carb that I've bought for street stock racing . runs great
Dear Guzzer
Finished 4th first night out against the best... great investment
Dear Guzzer
I have one of your carbs needing repair, the top was broken where all thread screws in for air cleaner. can you give me an estimate for replacing top of carb ? Also can you tell me about carb from number stamped on it , I bought it used , best carb I have ran.